# Can You Install Your Own EV Charger? By EV Charge Cables ยท Published 17 October 2026 **The short version** Realistically no: EV charge-point wiring is notifiable work under Part P, so it needs a qualified or OZEV-approved installer, not DIY. - DIY is only legal if fully BS 7671 compliant and notified or inspected, and is strongly discouraged for EV circuits. - You can still choose the charger, pick the mounting spot, and buy your own Type 2 charging lead. - Grant-funded work must use an OZEV-approved installer. Realistically, no: you should not install your own home EV charger. In England and Wales, wiring or altering an EV charge-point circuit is notifiable work under Part P of the Building Regulations, so it needs a qualified electrician or registered competent person, not a weekend DIY job. The safest and simplest route is a qualified, OZEV-approved EV installer. What you can do yourself is the planning: choosing the charger, picking the mounting spot and, for untethered units, buying the right [Type 2 charging lead](https://www.evchargecable.co.uk/collections/ev-charging-cables). For the full picture of the job itself, see our guide to [EV home charger installation and what to expect](https://www.evchargecable.co.uk/blogs/guides/ev-home-charger-installation-what-to-expect). [[QUOTE_CTA:Thinking about installation?|Start my quote]] ### Can you legally install your own EV charger? In principle, DIY electrical work is only legal if it fully complies with BS 7671 (the UK wiring regulations) and is properly notified to building control and inspected. For an EV charge-point circuit in England and Wales, that work is notifiable under Part P, which means it must be carried out by a registered competent person or signed off by building control. Scotland and Northern Ireland have their own building standards that apply in a similar way. So the honest answer is that it is not simply "banned", but the bar is high. In practice, meeting every requirement and getting the work inspected is more cost and hassle than most people expect, and it is realistically a professional job. For EV circuits specifically, DIY is strongly discouraged. If you want any funding through a government grant, the rules are stricter still: grant-eligible work must be done by an OZEV-approved installer. You cannot self-install and claim a grant. For what is available, see [what EV charger grants are available in the UK](https://www.evchargecable.co.uk/blogs/guides/what-ev-charger-grants-are-available-in-the-uk) or check gov.uk. ### Why is it not a DIY job? A home charger is not a plug-in appliance. It is wired as a dedicated circuit from the consumer unit, with the right RCD and DC-fault protection, and the installer notifies the DNO (your local electricity network operator). Get any of that wrong and you risk electric shock, fire, a failed insurance claim, or a charger that trips out constantly. There are several technical judgements only a qualified person should make: - **Protection:** an EV circuit needs appropriate RCD and DC fault protection, selected and tested correctly. - **Supply capacity:** your installer checks whether the supply has enough spare capacity; if it is tight, they may fit load management or a CT clamp rather than upgrade the supply. See [can your home fuse box handle an EV charger](https://www.evchargecable.co.uk/blogs/guides/can-your-home-fuse-box-handle-an-ev-charger). - **Cable sizing:** a longer run needs a larger supply cable to keep voltage drop within BS 7671 limits, which the electrician sizes. More on that in [what size cable for an EV charger](https://www.evchargecable.co.uk/blogs/guides/what-size-cable-for-ev-charger). - **DNO notification:** the installer handles this; higher-power or three-phase installs can need DNO prior approval, which adds time. This is why a general handyman is not the right person either. The work needs someone qualified in domestic electrical installation, and ideally one who installs EV chargers regularly. ### Who can install an EV charger? An EV charge-point circuit should be installed by a qualified electrician or registered competent person, typically registered with a scheme such as NICEIC, NAPIT or Stroma. For any grant-funded work, you specifically need an OZEV-approved installer, which is a separate approval on top of being a competent electrician. When you get quotes, it is reasonable to ask which scheme the installer is registered with, whether they are OZEV-approved if you are chasing a grant, and whether they will notify the DNO and provide the electrical certificate. Always get two to three quotes before you commit. For the questions and requirements to line up first, see [what you need to install an EV charger](https://www.evchargecable.co.uk/blogs/guides/what-do-you-need-to-install-an-ev-charger). ### DIY vs professional: how they compare The table below sets out the practical differences. In almost every case, the professional route is the sensible one for an EV circuit. | Factor | DIY | Qualified or OZEV-approved installer | | --- | --- | --- | | Legal under Part P | Only if fully BS 7671 compliant and notified or inspected; realistically very hard | Yes, self-certified or signed off as standard | | RCD and DC-fault protection | Your responsibility to select and test | Specified and tested to the regulations | | DNO notification | Down to you | Handled by the installer | | Eligible for a grant | No | Yes, if the installer is OZEV-approved | | Electrical certificate | Not provided | Provided, useful for insurance and resale | | Safety and insurance risk | High | Low | | Realistic recommendation | Strongly discouraged | Recommended | ### What can you do yourself? Plenty, just not the wiring. The parts you can own are the decisions that make the installer's visit quicker and the finished setup better suited to your home. #### Choose the charger Decide between a tethered unit (lead attached) and an untethered one (you plug in your own lead). All new private home chargepoints sold in Great Britain must be smart, meaning schedulable, under the EV smart charge point regulations, so you only need to pick the features and look you want. If you want a backup or occasional option, a [portable charger](https://www.evchargecable.co.uk/collections/portable-ev-chargers) is a separate purchase you can make yourself. #### Pick the mounting spot Choose a wall or post near the parking space, on the side the car's charging port sits where possible, at a sensible height and ideally sheltered. Most wallboxes are weather-rated for outdoors, but a tidy, sheltered position keeps the lead reaching the port without strain and without trailing across a path people walk on. Your installer will confirm the final position, but having a preferred spot in mind helps. You also need off-street parking with a fixed space; running a cable across a public pavement is generally not allowed without a council permit or channel. #### Buy your charging lead If you go untethered, you supply the car-to-chargepoint Type 2 lead, and the right length depends on where the charger ends up relative to your parking spot. Browse our [EV charging cables](https://www.evchargecable.co.uk/collections/ev-charging-cables), and if you are unsure on length, read [what length EV charging cable do I need](https://www.evchargecable.co.uk/blogs/guides/what-length-ev-charging-cable-do-i-need). Pick the length once you know the mounting position so the lead reaches comfortably without being over-long. ### What does professional installation involve and cost? A straightforward install usually takes around half a day to a day on site, and from enquiry to installed is often one to three weeks. A DNO application for a higher-power or three-phase setup can add weeks, so flag any such plans early. On cost, treat the charger unit and the installation as two separate lines. A straightforward installation is typically in the low-to-mid hundreds of pounds, but it varies a lot. Things that push it up include a long cable run, groundworks or trenching, a consumer unit or earthing upgrade, or working at height. Grants can reduce the cost for eligible flats, renters and landlords. For a fuller breakdown, see [how much does it cost to install an EV charger](https://www.evchargecable.co.uk/blogs/guides/how-much-does-it-cost-to-install-an-ev-charger) and [how long does it take to install an EV charger](https://www.evchargecable.co.uk/blogs/guides/how-long-does-it-take-to-install-an-ev-charger). Whatever route you take, the work itself should go to a professional: the safest route is a qualified, OZEV-approved EV installer. ### Frequently asked questions #### Is it illegal to install your own EV charger in the UK? Not automatically, but EV charge-point work is notifiable under Part P in England and Wales, so DIY is only legal if it fully complies with BS 7671 and is properly notified or inspected. In practice it is strongly discouraged and realistically a professional job. Scotland and Northern Ireland have their own building standards. #### Can an electrician who is not OZEV-approved install my charger? Yes, a qualified electrician or registered competent person can install a home charger. However, if you want to use a government grant, the work must be done by an OZEV-approved installer, which is a separate approval. Always get two to three quotes and check the installer's scheme registration. #### Do I need to tell my electricity network about the charger? Your installer notifies the DNO, your local electricity network operator, as part of the job. Higher-power or three-phase installs can need DNO prior approval before work starts, which adds time, so mention any such plans when you request quotes. #### Can a handyman fit an EV charger? No. An EV charge-point circuit needs a qualified electrician or registered competent person because it involves a dedicated circuit, the correct RCD and DC-fault protection, and DNO notification. A general handyman is not the right person for notifiable electrical work. #### What parts of the process can I do myself? You can choose the charger, decide on a preferred mounting spot near the parking space, and for an untethered unit buy your own Type 2 charging lead in the right length. The electrical installation itself should be left to a qualified installer. #### How long does professional installation take? A straightforward install usually takes around half a day to a day on site, and from enquiry to installed is often one to three weeks. A DNO application for a higher-power or three-phase setup can add weeks, so it is worth planning ahead. [[QUOTE_CTA:Thinking about installation?|Start my quote]] --- Canonical version: https://www.evchargecable.co.uk/blogs/guides/can-you-install-your-own-ev-charger EV Charge Cables, EV charging cables matched to your car: https://www.evchargecable.co.uk. Some links in this article are Amazon affiliate links; as an Amazon Associate we earn from qualifying purchases at no extra cost to you.