# How Much Does It Cost to Install an EV Charger?

By EV Charge Cables · Published 17 October 2026

**The short version**

A straightforward home EV charger installation is typically in the low-to-mid hundreds of pounds, with the charger unit a separate cost, and the real figure depends on your property.

- The charger unit and the installation labour are two separate costs.
- Long cable runs, groundworks, consumer unit or earthing upgrades and working at height all add cost.
- Get two or three quotes, check gov.uk for grants, and budget for a Type 2 lead if your charger is untethered.

Installing an EV charger at home involves two separate costs: the charger unit itself and the installation work, and a straightforward installation is typically in the low-to-mid hundreds of pounds, though the final figure varies a lot with your property. Because wiring a chargepoint circuit is notifiable electrical work, the price always reflects a qualified professional doing the job properly, and the smartest way to understand your own cost is to get two or three quotes from reputable installers. For the full picture of what a visit involves, see our guide on [EV home charger installation: what to expect](https://www.evchargecable.co.uk/blogs/guides/ev-home-charger-installation-what-to-expect).

[[QUOTE_CTA:Thinking about installation?|Start my quote]]

This guide sets out the things that push the price up and down so you can read a quote with confidence. We sell the charging [Type 2 charging cables](https://www.evchargecable.co.uk/collections/ev-charging-cables) and [portable chargers](https://www.evchargecable.co.uk/collections/portable-ev-chargers) you plug in once the chargepoint is fitted, not the installation itself, so the aim here is honest, general guidance rather than a sales pitch.

### What are you actually paying for?

There are two line items worth separating in your head. The first is the chargepoint unit, which is the wall box or post you buy. The second is the installation, which is the labour and materials to wire it in safely as a dedicated circuit from your consumer unit, with the correct RCD and DC-fault protection, plus the installer notifying your Distribution Network Operator (DNO).

A clean, simple job on a modern home with a nearby consumer unit sits at the lower end. Anything that makes the cable run longer, the electrics older, or the mounting trickier moves the installation cost up. The unit price is largely down to the model and features you choose; the installation price is largely down to your property.

#### Why the installation has to be done by a professional

Installing or altering an EV chargepoint circuit is notifiable work under Part P of the Building Regulations in England and Wales, and Scotland and Northern Ireland have their own building standards. It must be carried out by a qualified electrician or a registered competent person (for example a member of NICEIC, NAPIT or Stroma) who works to BS 7671, or otherwise notified to building control. If you want to apply for any grant, the work must be done by an OZEV-approved installer. This is not a job for a general handyman, and the safest route is a qualified, OZEV-approved EV installer.

### What affects the price of an EV charger installation?

Most of the variation comes down to a handful of factors. The table below shows the usual direction each one pushes your installation cost, without inventing figures that would not hold true across every property.

| Factor | Effect on cost |
| --- | --- |
| Short, simple cable run from the consumer unit to the mounting point | Lowest cost, this is the baseline straightforward job |
| Long cable run (charger far from the fuse box) | Adds cost: more cable, a larger cable to manage voltage drop, and more labour |
| Groundworks or trenching (for example running a cable under a driveway) | Adds cost, sometimes significantly, as it is extra time and often a second trade |
| Consumer unit or earthing upgrade needed to meet BS 7671 | Adds cost: older boards or earthing arrangements may need work before the circuit can be added |
| Working at height or awkward access to the mounting position | Adds cost: more time, and possibly access equipment |
| Tight main fuse or supply capacity | Usually managed with load management or a CT clamp rather than a supply upgrade, but the installer confirms this on site |
| Higher-power or three-phase install needing DNO prior approval | Adds time rather than a fixed fee, as the application can take weeks |
| Eligibility for a grant (some flats, renters and landlords) | Can reduce your net cost, check gov.uk and use an OZEV-approved installer |

#### Long cable runs and the consumer unit

There is no single legal maximum distance between your charger and the fuse box, so a chargepoint can sit a good way from the consumer unit. The catch is that a longer run needs a larger supply cable to keep voltage drop within BS 7671 limits, and that cable and extra labour cost more. Your electrician sizes the cable for your specific run, and keeping the route as short as practical helps keep the price down. We cover this in more detail in [how far can an EV charger be from the fuse box](https://www.evchargecable.co.uk/blogs/guides/how-far-can-an-ev-charger-be-from-the-fuse-box) and the related [what size cable for an EV charger](https://www.evchargecable.co.uk/blogs/guides/what-size-cable-for-ev-charger).

#### Does your fuse box or supply need upgrading?

Not always. If your main fuse or supply is tight, a good installer will often fit load management or a CT clamp so the charger backs off when the house is drawing heavily, rather than pushing you towards a supply upgrade. An older consumer unit or earthing arrangement, on the other hand, may need bringing up to standard before the new circuit can be added, and that is where a chunk of unexpected cost can appear. Our guide on [whether your home fuse box can handle an EV charger](https://www.evchargecable.co.uk/blogs/guides/can-your-home-fuse-box-handle-an-ev-charger) walks through this.

#### Single-phase, three-phase and DNO approval

Most UK homes are single-phase, and a standard home charger runs happily on that. If you are considering higher-power or three-phase charging, the installer may need DNO prior approval, which does not always add a fixed fee but can add weeks to the timeline. Weigh it up with [single-phase vs three-phase EV charging](https://www.evchargecable.co.uk/blogs/guides/single-phase-vs-three-phase-ev-charging) and [whether three-phase power at home is worth it for charging](https://www.evchargecable.co.uk/blogs/guides/three-phase-power-at-home-is-it-worth-it-for-charging) before you commit.

### Can grants bring the cost down?

They can, for eligible households. Grant schemes have changed over the years and now focus on specific groups such as some flats, renters and landlords rather than every homeowner. Rather than quote amounts that may be out of date, we point you to the official sources: check current eligibility and values on gov.uk, and read our overview of [what EV charger grants are available in the UK](https://www.evchargecable.co.uk/blogs/guides/what-ev-charger-grants-are-available-in-the-uk). Any grant-funded work must be carried out by an OZEV-approved installer.

### Do you need to buy a charging lead too?

This is a small cost many people forget. Chargepoints come in two styles: tethered, which has a cable permanently attached, and untethered, which has just a socket. If you choose an untethered charger you need to own a Type 2 charging lead to connect the car, and you pick the length that suits where the charger sits relative to your parking space. It is a separate, modest purchase rather than part of the installation.

Getting the length right matters, because the lead should reach your car's charging port without strain and without trailing across a path people walk on. Our guide on [what length EV charging cable you need](https://www.evchargecable.co.uk/blogs/guides/what-length-ev-charging-cable-do-i-need) helps you choose, and you can browse options in our [EV charging cables](https://www.evchargecable.co.uk/collections/ev-charging-cables) collection.

### Where should the charger go, and does placement change the cost?

Placement affects both the install price and how usable the charger is day to day. Mounting it near the side your car's charging port is on, at a sensible height and ideally somewhere sheltered, keeps the cable run short and the setup tidy. Most wallboxes are weather-rated for outdoor use, so an exposed wall is fine, but an awkward or high position adds labour. You also need off-street parking with a fixed space, since running a cable across a public pavement is generally not allowed without a council permit or channel.

### How long does installation take, and what is the process?

A straightforward install usually takes around half a day to a day on site. From first enquiry to a working charger is often one to three weeks, and a DNO application for a higher-power or three-phase setup can add further weeks. The sequence is usually a remote or on-site survey, a quote, booking in, then the fit and sign-off. For a step-by-step view, see [what to expect](https://www.evchargecable.co.uk/blogs/guides/ev-home-charger-installation-what-to-expect), and browse more of our [EV charging guides](https://www.evchargecable.co.uk/blogs/guides) if you are still planning.

### How to get an accurate price for your home

Because so much depends on your property, the only reliable number is a quote based on your actual setup. We suggest a simple approach:

1. Get two or three quotes from qualified, registered installers, OZEV-approved if you want a grant.
2. Ask each to confirm the cable run, whether your consumer unit or earthing needs any work, and whether load management is needed.
3. Check whether you are eligible for any grant on gov.uk before you book.
4. Decide tethered or untethered, and if untethered, budget for a correctly sized Type 2 lead.

Related reading if a quote throws up surprises: [can you install your own EV charger](https://www.evchargecable.co.uk/blogs/guides/can-you-install-your-own-ev-charger), [what you need to install an EV charger](https://www.evchargecable.co.uk/blogs/guides/what-do-you-need-to-install-an-ev-charger), and [what to do if an EV charger keeps tripping the RCD](https://www.evchargecable.co.uk/blogs/guides/my-home-charger-keeps-tripping-common-causes).

**Quick tool:** that is the one-off install cost. To see what charging then costs, try our [EV charging cost calculator](https://www.evchargecable.co.uk/tools/ev-charging-cost-calculator).

### Frequently asked questions

#### How much does it cost to install an EV charger at home?

A straightforward home installation is typically in the low-to-mid hundreds of pounds, but it varies a lot with your property. The charger unit is a separate cost from the installation labour. The only way to know your figure is to get two or three quotes from qualified installers based on your actual setup.

#### What makes an EV charger installation more expensive?

The main cost drivers are a long cable run from the consumer unit, groundworks or trenching, a consumer unit or earthing upgrade to meet BS 7671, and working at height or in an awkward position. A higher-power or three-phase install needing DNO approval adds time rather than a fixed fee.

#### Can I install an EV charger myself to save money?

Wiring an EV chargepoint circuit is notifiable work under Part P in England and Wales, with separate standards in Scotland and Northern Ireland, so it must be done by a qualified electrician or registered competent person, or notified to building control. It is realistically a professional job, and the safest route is a qualified, OZEV-approved EV installer.

#### Is there a grant to help with the cost?

Grants exist for certain groups such as some flats, renters and landlords, rather than every homeowner, and the schemes change over time. Check current eligibility and values on gov.uk, and note that grant-funded work must be carried out by an OZEV-approved installer.

#### Do I need to buy a charging cable as well?

If you choose an untethered charger, yes: you need your own Type 2 charging lead, sized by length to suit where the charger sits relative to your parking space. A tethered charger has the cable built in, so no separate lead is needed. The lead is a small, separate cost from the installation.

#### How long does it take to get an EV charger installed?

A straightforward install usually takes around half a day to a day on site, and from enquiry to a working charger is often one to three weeks. A DNO application for a higher-power or three-phase setup can add further weeks, so start the process early if you need higher power.

[[QUOTE_CTA:Thinking about installation?|Start my quote]]

---

Canonical version: https://www.evchargecable.co.uk/blogs/guides/how-much-does-it-cost-to-install-an-ev-charger

EV Charge Cables, EV charging cables matched to your car: https://www.evchargecable.co.uk. Some links in this article are Amazon affiliate links; as an Amazon Associate we earn from qualifying purchases at no extra cost to you.