# What Charging Cable Does a Plug-in Hybrid Need? By EV Charge Cables ยท Published 6 October 2026 **The short version** A plug-in hybrid uses a Type 2 lead if post-2018 or a Type 1 lead if older, usually at a low AC rate. - Post-2018 PHEVs use a Type 2 to Type 2 lead like full EVs - Many PHEVs cap AC at around 3.7kW, so 16A or 32A both work - A 32A single phase cable is the flexible, future proof default A plug-in hybrid needs the same type of cable as a full EV: a Type 2 to Type 2 lead if it was sold since 2018, or a Type 1 to Type 2 lead if it is an older model. The key difference is speed. Most PHEVs have a small battery and a modest onboard charger, so they usually accept only around 3.7kW of AC, meaning a 16A or 32A single phase cable both work and neither charges the car faster than its own limit. To match a lead to your exact model, our [which EV charging cable do I need](https://www.evchargecable.co.uk/blogs/guides/which-ev-charging-cable-do-i-need) guide covers it by connector. ### At a glance: PHEV charging cable needs | Car age | Connector needed | Typical AC rate | Suitable cable | | --- | --- | --- | --- | | Sold since 2018 | Type 2 to Type 2 | Around 3.7kW | 16A or 32A single phase | | Older PHEV (pre-2018) | Type 1 to Type 2 | Around 3.7kW | Type 1 lead, single phase | | Any PHEV, backup use | 3-pin granny charger | Around 2.3kW | Portable charger, occasional only | ### Which connector does a plug-in hybrid use? Almost every PHEV sold in the UK since 2018 uses a Type 2 inlet, the same 7-pin standard as full EVs. Older plug-in hybrids, such as the early Mitsubishi Outlander PHEV, may use the older Type 1 connector, which is single phase only. The charger end is always Type 2 at home and public AC points, so the difference is only ever at the car socket. Check your inlet shape before buying, because Type 1 and Type 2 plugs are not interchangeable. ### Does my PHEV charge slower than a full EV? Usually yes, because most PHEVs have a smaller onboard charger. Many accept only around 3.7kW of AC, so even on a 7.4kW wallbox they draw less than a full EV would. That is not a fault: the smaller battery fills quickly anyway, often in a couple of hours. The cable never forces more power than the car's onboard charger allows, so a higher rated lead will not speed up a PHEV that caps its AC draw low. ### Should I buy a 16A or 32A cable? Either works, but 32A is the flexible default. If your PHEV caps AC at around 3.7kW, a 16A and a 32A cable will charge it at the same rate, because the car is the limiting factor. A 32A lead costs a little more and weighs slightly more, but it future proofs you if you later switch to a full EV that can draw 7.4kW. A 16A lead is a lighter, cheaper option if you only ever run a low draw PHEV. ### Do I still need a proper cable if my PHEV came with a granny charger? Yes, if you want to use a home wallbox or untethered public posts. A granny charger plugs into a 3-pin domestic socket at around 2.3kW, adding roughly 8 to 10 miles per hour, which is slow even for a small PHEV battery. Plug it directly into a wall socket on its own circuit, never through an extension lead or adapter. A Type 2 lead lets you charge faster at a wallbox and is worth having for daily use. ### What length cable suits a plug-in hybrid? Choose the length by your parking, not the car. A 5m lead suits most driveways and home wallboxes. Pick 7m or 10m for on street bays, shared chargers, or when the inlet sits far from the post. Longer cables cost and weigh more, so match the length to your real situation. See the standard formats and ratings on our [Type 2 charging cables](https://www.evchargecable.co.uk/type-2-charging-cables) page to compare. #### Quick buying summary for PHEV drivers - Post-2018 PHEV: Type 2 to Type 2 lead, 32A for flexibility - Older PHEV with Type 1 inlet: Type 1 to Type 2 lead - Keep a granny charger as a backup for sockets away from home ### Frequently asked questions #### Do plug-in hybrids use the same cable as electric cars? Yes, the connector types are the same. A PHEV sold since 2018 uses a Type 2 to Type 2 lead, exactly like a full EV. Older PHEVs may use a Type 1 to Type 2 lead. The main difference is that many PHEVs accept a lower AC rate, so they charge more slowly than a full EV would on the same cable. #### Will a faster cable charge my PHEV quicker? Not if your PHEV caps its AC draw. Many PHEVs accept only around 3.7kW, so a 16A and a 32A cable charge them at the same rate. The cable never forces more power than the car's onboard charger allows. A higher rated cable only helps if the car can actually draw the extra current. #### Can I charge a PHEV on a normal 3-pin socket? Yes, using a granny charger plugged directly into a wall socket on its own circuit. It delivers around 2.3kW, adding roughly 8 to 10 miles per hour, which suits a small PHEV battery for occasional top-ups. Never use an extension lead, multi-way adapter or smart plug, as these carry a fire risk under sustained load. #### How long does a plug-in hybrid take to charge? Because PHEV batteries are small, charging is often quick. On a wallbox at around 3.7kW many PHEVs charge in a couple of hours from low. On a 3-pin granny charger at 2.3kW it takes longer. Exact times depend on your battery size and onboard charger, so check your handbook for figures. #### Is a 22kW cable worth it for a plug-in hybrid? No, a 22kW cable is overkill for a PHEV. It needs a three phase supply and a car that accepts three phase AC, which PHEVs do not. On a single phase home it charges no faster than a standard lead. A 16A or 32A single phase cable is all a plug-in hybrid needs. #### How do I know if my PHEV is Type 1 or Type 2? Look at the inlet on the car. Type 2 has 7 pins and is the standard on cars sold since 2018. Type 1 has 5 pins and appears on some older models. If unsure, check the handbook or enter your registration on our cable finder to confirm the right lead rather than guessing. To sum up: a plug-in hybrid needs a Type 2 to Type 2 lead if it is post-2018, or a Type 1 to Type 2 lead if older, and a 32A single phase cable covers most cases with room to spare. For help telling the connectors apart, read our [Type 1 vs Type 2](https://www.evchargecable.co.uk/blogs/guides/type-1-vs-type-2) guide, or use our [cable finder by car](https://www.evchargecable.co.uk/ev-charging-cable) to confirm the exact lead for your model. --- Canonical version: https://www.evchargecable.co.uk/blogs/guides/what-cable-does-a-plug-in-hybrid-need EV Charge Cables, EV charging cables matched to your car: https://www.evchargecable.co.uk. Some links in this article are Amazon affiliate links; as an Amazon Associate we earn from qualifying purchases at no extra cost to you.