# What Gauge Are EV Charging Cables?

By EV Charge Cables · Published 18 October 2026

**The short version**

EV charging cables use 6 mm² conductors for standard 7.4 kW home wallbox charging, with different specs for slower or three-phase use.

- Conductor cross-section (measured in mm²) determines how much current a cable can carry safely without overheating.
- A 6 mm², 32 A-rated Type 2 cable is the standard choice for most UK home wallboxes.
- Three-phase 22 kW charging requires a heavier cable rated across all three phases.

EV charging cables use thick, multi-core conductors to handle the sustained high currents that charging demands, and the gauge of those conductors determines how much current the cable can safely carry. Most Type 2 cables sold for home and public AC charging are built around a cross-sectional area of either 2.5 mm² or 6 mm² per conductor, with 6 mm² being the more capable and more common choice for a 7 kW or higher wallbox. The short version: you want a cable that is rated for at least as much current as your wallbox and car can supply, and buying the right cable from the start saves you problems later. Our [Type 2 cable range](https://www.evchargecable.co.uk/collections/type-2-charging-cables) covers the most common ratings for UK home and public charging.

| Cable conductor size | Typical current rating | Suitable for |
| --- | --- | --- |
| 2.5 mm² | Up to around 16 A (single-phase) | Slower AC charging, some granny charger cables |
| 4 mm² | Up to around 20-25 A | Mid-range AC wallboxes |
| 6 mm² | Up to 32 A (single-phase) or higher | Standard 7.4 kW wallbox and most public Type 2 posts |
| 6 mm² (three-phase) | 32 A per phase | 11 kW and 22 kW three-phase AC charging |

### Why does conductor cross-section matter?

Electrical resistance in a conductor increases as the conductor gets thinner. A thin conductor carrying a large current generates more heat than a thicker one carrying the same current, because the electrons have to force their way through a narrower path. Over a long charging session, this heat can degrade the insulation, cause the plug to become warm to the touch, and in extreme cases lead to a fault. EV charging cables must be able to sustain their rated current for several hours without excessive heating, which is why the conductors inside them are considerably heavier than you would find in a standard domestic appliance lead. The gauge or cross-sectional area is the key specification that determines this rating.

### What gauge cable do you need for a home wallbox?

For a typical UK home wallbox operating at 7.4 kW on a 32 A single-phase circuit, a 6 mm² conductor cross-section is the standard choice. This gives comfortable headroom at the rated current and keeps the cable at a safe temperature during a full overnight charge. A 2.5 mm² cable is only suitable for lower charge rates, around 16 A or less, and using it on a higher-rated charger risks overheating. If you are unsure which rating your wallbox operates at, check the label on the unit or the installation certificate. Matching the cable rating to the charger is a basic but important step.

### Do DC rapid charging cables use different gauges?

DC rapid and ultra-rapid chargers are tethered: the cable is permanently attached to the charger post and is the network operator's responsibility. You do not provide your own cable for DC charging. Those cables carry very large currents indeed, often hundreds of amps, and are typically liquid-cooled to manage the heat. The conductors inside them are considerably heavier than anything in a portable AC cable, and the design is specialised for the purpose. As a driver, you simply connect the appropriate plug (CCS, CHAdeMO, or on some newer chargers, NACS) to your car's DC inlet.

### Does the outer sheath thickness matter as well?

Yes. The outer sheath protects the conductors from physical damage, moisture, oil, and UV. EV charging cables are typically rated to IP44 or IP55, which means they can handle being used outdoors in rain and are designed to be dragged across tarmac or concrete. A thicker, more robust sheath makes the cable more durable in daily use. It also tends to make the cable heavier and less flexible, which is a trade-off. For garage or driveway use, a reasonably robust cable matters more than outright flexibility. For travel, a lighter cable in a bag may be preferable, though it should still be rated for the charge rate you need. Our [EV charging accessories](https://www.evchargecable.co.uk/collections/ev-charging-accessories) include bags and organisers that protect your cable between uses.

### Can you use any Type 2 cable, or do they differ?

Type 2 is the connector standard, not a guarantee of the cable's current rating. Two Type 2 cables can look identical on the outside but differ significantly in their conductor cross-section and current rating. Always check the cable's rated amperage before buying. A cable rated for 32 A will work on a 7.4 kW single-phase wallbox; one rated for only 16 A will not safely sustain that load. Reputable suppliers clearly state the rating on the product listing, and the cable itself should also be marked. If you cannot find the current rating listed, that is a reason to look elsewhere.

### Frequently asked questions

#### What gauge cable do I need for a 7 kW wallbox?

A 7.4 kW single-phase wallbox runs at 32 A. You need a cable with a conductor cross-section of 6 mm² to handle this safely. A cable rated for 16 A or 20 A will not safely sustain the full charge rate and may overheat during a long session.

#### Does the length of the cable affect how much current it can carry?

Longer cables have higher resistance, which means slightly more heat for the same current. Quality charging cables are designed with this in mind, but very long cables can cause a small voltage drop at the car end. For most home driveways, a cable of 5 to 10 metres is adequate. If you need a particularly long run, use the shortest cable that works for your layout rather than the longest available.

#### Are 22 kW cables different from standard Type 2 cables?

Yes. Three-phase 22 kW charging requires a cable rated for 32 A across three phases, which means it has three power conductors plus earth and neutral. These cables are heavier and thicker than single-phase cables. Browse our [22 kW cable range](https://www.evchargecable.co.uk/collections/22kw-ev-charging-cables) for options suited to three-phase chargers.

#### Is the gauge marked on the cable itself?

It should be, though the marking may be on the cable body rather than the plugs. Look for a marking such as "6mm²" or "32A" printed or embossed on the outer sheath. If a cable has no markings, it is difficult to verify its rating and it is wise to be cautious about using it for sustained high-current charging.

#### Can I use a thicker gauge cable than I need? Is there any downside?

A cable with a larger conductor than required for your charge rate is perfectly safe. The only practical downsides are that a thicker cable is heavier and less flexible, making it slightly more awkward to handle and store. There is no electrical problem with using an over-specified cable.

#### What happens if I use an underrated cable?

An underrated cable will heat up during a sustained charge session. Moderate overheating degrades the insulation over time; severe overheating can cause the plug to char or the cable to fail. Many wallboxes include temperature monitoring and will reduce the charge rate or stop charging if they detect a problem at the plug, but this is a safety net rather than a reason to use a cable that is not rated for the job.

Choosing the right gauge charging cable is a straightforward decision once you know your wallbox's rated current: most standard home wallboxes need a 6 mm² Type 2 cable rated for 32 A. If you charge at three-phase AC speeds, the cable needs to match that too. Browse our full range of [Type 2 charging cables](https://www.evchargecable.co.uk/collections/type-2-charging-cables) with clearly listed ratings, or visit [our Guides](https://www.evchargecable.co.uk/blogs/guides) if you want more detail on choosing between tethered and portable cable setups.

---

Canonical version: https://www.evchargecable.co.uk/blogs/guides/what-gauge-are-ev-charging-cables

EV Charge Cables, EV charging cables matched to your car: https://www.evchargecable.co.uk. Some links in this article are Amazon affiliate links; as an Amazon Associate we earn from qualifying purchases at no extra cost to you.
