# What Is Plug and Charge? By EV Charge Cables ยท Published 18 October 2026 **The short version** Plug and Charge is an ISO 15118 standard that lets your EV and a compatible charger authenticate automatically the moment you plug in, with no app or card required. - Authentication is handled by an encrypted digital certificate stored in the vehicle, billed to your linked account - Supported on many newer EVs and an increasing number of UK rapid chargers, though coverage is still rolling out - Always carry a contactless card or RFID backup, as not every charger on every network is enrolled yet Plug and Charge is a communication standard, defined by ISO 15118, that lets your electric vehicle and a compatible public charger authenticate each other automatically the moment you plug in. No app, no RFID card, no PIN: the cable does everything. It works by encrypting a digital certificate inside the car, which the charger reads and verifies in seconds, then billing your linked payment method directly. If you are looking for the right cable to take advantage of this technology, the [EV charging cable finder](https://www.evchargecable.co.uk/ev-charging-cable) can match you to the correct connector for your car. | Feature | Plug and Charge | App or RFID | | --- | --- | --- | | Authentication method | Automatic via ISO 15118 certificate | Manual: tap card or open app | | Steps to start a session | Plug in | Plug in, then authenticate separately | | Payment | Billed to account linked to the certificate | Billed via app, card, or contactless | | Works without phone signal | Yes (car-to-charger only) | No (app) / Yes (RFID card) | | UK availability | Growing, not universal | Widely available | | Setup required | One-time account link via manufacturer app | Per-network registration | ### How does Plug and Charge work in practice? When you connect a compatible CCS or CHAdeMO cable, the car and charger open an encrypted communication channel under ISO 15118. The charger requests a certificate from the vehicle, the vehicle supplies it, and the network verifies it against your registered account. The whole handshake takes a few seconds. Once confirmed, the charger begins delivering power automatically. You do not press anything on a screen or reach for your phone. When you unplug, a final message closes the session and triggers billing. ### Which cars and networks support it? Support is growing but uneven. Many newer premium and mainstream EVs have ISO 15118 hardware built in, though the feature sometimes requires a software update or an active subscription through the manufacturer's connected-services platform. On the network side, high-power DC rapid chargers are more likely to support the standard than slower AC units. Compatibility depends on both the car and the specific charger being enrolled in the same ecosystem, so one network may work seamlessly while another at the same motorway services does not. Always check your vehicle handbook and your preferred network's website for a confirmed list. ### What are the benefits over app and RFID charging? - **Fewer steps at the charger:** plug in and walk away, rather than tapping cards or loading apps in the rain. - **One account, multiple networks:** because authentication is certificate-based, a single registration can theoretically span multiple operators as the ecosystem matures. - **No phone signal needed:** the handshake is between car and charger, so patchy signal at rural rapid chargers is less of a problem. - **Reduced friction for new EV drivers:** removing the app layer makes public charging feel closer to refuelling a petrol car. - **Bidirectional charging readiness:** ISO 15118 also underpins vehicle-to-grid (V2G) communication, so Plug and Charge-compatible hardware is already part of the infrastructure needed for future smart-charging and export tariffs. ### What is the current situation in the UK? UK rollout is underway but patchy as of late 2026. Some of the larger rapid-charging networks have enabled Plug and Charge on a portion of their DC units, particularly newer 150kW and 350kW chargers installed in the past couple of years. Slower 7kW and 22kW AC public chargers are far less likely to support it because the standard is more commonly implemented on high-power DC hardware. Government guidance on public charge point regulations continues to push for open, interoperable standards, which should accelerate adoption in the years leading up to the 2030 new petrol car sale ban. ### Do you still need a backup payment method? Yes, always carry one. Even on networks that support Plug and Charge, individual chargers can be offline, not yet enrolled, or running firmware that does not complete the handshake correctly. The UK Public Charge Point Regulations require most public chargers to accept contactless payment, so a bank card is a reliable fallback. Keeping the network's app installed and an RFID card in the glovebox means you are never stranded. Plug and Charge is a convenience upgrade, not a replacement for belt-and-braces preparation. ### What do you need to get started? #### On the car side - A vehicle with ISO 15118 support enabled (check with your manufacturer or dealer) - An active connected-services subscription if the manufacturer requires one - A CCS (Combined Charging System) cable, the connector type most commonly used with Plug and Charge on DC rapid chargers in the UK #### On the network side - A charger that has been enrolled in an ISO 15118-compatible backend - A registered account with that network, linked during your manufacturer's initial setup process If your car does not yet support the feature, or you are charging on a network that does not, a [Type 2 charging cable](https://www.evchargecable.co.uk/type-2-charging-cables) paired with your usual app or RFID card remains a perfectly reliable option for AC public charging. ### Frequently asked questions #### Is Plug and Charge the same as autocharge? No, they are different. Autocharge is a simpler system where the charger recognises a car by its unique identifier, without a full encrypted certificate exchange. It offers a similar plug-in-and-go experience but provides fewer security guarantees than the full ISO 15118 Plug and Charge protocol and is less interoperable across networks. #### Does Plug and Charge work with home chargers? Rarely at present. Home wallboxes almost universally use simpler protocols for communication. ISO 15118 Plug and Charge is primarily a public rapid-charging feature. For home charging you will typically plug in and the session starts automatically anyway, so the convenience gap versus the public network does not really apply. #### Can I use Plug and Charge with a portable EV charger? No. Portable or granny chargers that connect to a standard three-pin or commando socket use basic power delivery with no digital communication layer. ISO 15118 requires specific hardware on both ends. Portable chargers are best suited to slow overnight or emergency top-ups rather than smart-charging scenarios. Browse [portable EV chargers](https://www.evchargecable.co.uk/portable-ev-chargers) if that is what you need. #### Is my payment information stored securely? Yes. The certificate stored in the vehicle does not contain your card number directly. It links to an account held by the network operator or your car manufacturer's mobility service. Payment details are processed by the network's backend in the same way as any other digital transaction, and the ISO 15118 standard mandates encrypted communication throughout the handshake. #### Will Plug and Charge work if my car's software is out of date? It may not. The feature depends on specific software versions that implement the ISO 15118 stack correctly. Manufacturers roll out Plug and Charge capability via over-the-air updates or dealer software flashes. Check your vehicle's current software version in the settings menu, and enable automatic updates if your car supports them, to ensure you have the latest capability. #### What happens if the Plug and Charge handshake fails? The charger should fall back to prompting you for standard payment, either via contactless or the operator's app. The session does not simply fail with no options. If handshake failures happen repeatedly on a particular charger, report it to the network operator, as the issue is usually a configuration problem on the charger's backend rather than a fault with your vehicle. Plug and Charge is the most significant step towards frictionless public charging since rapid DC infrastructure arrived in the UK, and its coverage will only widen as newer hardware rolls out ahead of 2030. In the meantime, make sure you have the right kit: use the [EV charging cable guide](https://www.evchargecable.co.uk/ev-charging-cable) to confirm you have the correct connector, and browse the full [guides index](https://www.evchargecable.co.uk/blogs/guides) for more advice on charging at home, on the road, and at work. --- Canonical version: https://www.evchargecable.co.uk/blogs/guides/what-is-plug-and-charge EV Charge Cables, EV charging cables matched to your car: https://www.evchargecable.co.uk. Some links in this article are Amazon affiliate links; as an Amazon Associate we earn from qualifying purchases at no extra cost to you.