Kia XCeed PHEV
Charging cable
Full AC charging speed for your car.
Why this fits your XCeed PHEV+−
The Kia XCeed PHEV has a Type 2 inlet and a single-phase 3.3kW onboard charger. A 7.4kW cable already delivers its full AC speed. The 22kW option only helps if your next car charges faster.
Specifications+−
Delivery & returns+−
Free tracked UK delivery on every order. Built to order in the UK and dispatched fast. 30-day no-fuss returns.
Note: No DC rapid. Type 2 AC ~3.3kW.
How long does it take?
Charging
the Kia XCeed PHEV.
The Kia XCeed PHEV (first generation, from 2020) is a crossover positioned between a hatchback and a small SUV, offering a sportier roofline than the Sportage while carrying the same plug-in hybrid credentials. It uses a 1.6-litre petrol engine alongside an 8.9kWh battery, giving a short electric-only range suitable for local errands. The charging inlet is Type 2, and the cable for home and public AC charging is a Type 2 to Type 2 lead.
The XCeed PHEV's onboard charger is rated at 3.3kW single-phase, which is at the lower end for modern plug-in hybrids. There is no DC rapid charging option. Because 3.3kW is the hard limit the onboard charger imposes, no cable or charger can push it faster: the car simply accepts what its charger allows, and that is 3.3kW.
Estimates based on battery size and charge power. Rapid (DC) times are for a 10 to 80% charge, the way manufacturers quote them. Real-world charging varies with temperature, battery state and the charger itself.
7.4 kW or 22 kW?
Which cable does
the XCeed PHEV need?
Given the XCeed PHEV's 3.3kW onboard charger, the cable rating makes very little practical difference. Whether you use a 3.6kW or 7.4kW Type 2 cable, the car will draw the same 3.3kW. There is no benefit in paying for a higher-rated cable on this car; a standard untethered Type 2 to Type 2 lead rated at 16A is all that is needed.
A 5m cable is the right starting length for most home situations. The XCeed PHEV has a small 8.9kWh battery and a slow onboard charger, so the practical charging strategy is simply to plug in whenever the car is parked at home and let it top up quietly rather than managing charge sessions carefully. A 7m cable is worth considering if your wallbox is positioned at some distance from where you normally park.
What does it cost to charge?
Filling the 8.9kWh battery from empty costs less than £1 on an off-peak tariff of around 7.5p per kWh, and roughly £2.40 at a standard rate of around 27p per kWh. At 3.3kW, a full charge takes around three hours, so plugging in while the car is parked at home in the evening is more than sufficient. Check current tariffs before making assumptions about costs.
Also for your XCeed PHEV
Goes well with.
Plug & Cable Holder · Type 2
Wottz Plug and Cable Holder
Carry Bag
Wottz Carry Bag
Dust Cap · Type 2
Wottz Dust Cap
Kia XCeed PHEV FAQs
Good
questions.
Still not sure? Our team will confirm the right cable for your vehicle.
Contact usWhat charging cable does the Kia XCeed PHEV need?+−
The Kia XCeed PHEV has a Type 2 inlet, so it needs a Type 2 to Type 2 cable for UK home and public charging. It charges on single-phase AC at up to 3.3kW.
Can the Kia XCeed PHEV charge at 22kW?+−
No, the Kia XCeed PHEV has a single-phase onboard charger limited to 3.3kW, so a 7.4kW cable already delivers its full AC speed. A 22kW cable would only benefit a future car.
What length charging cable should I get?+−
5m suits most home and public charge points. Choose 7.5m or 10m if the charge point is far from your car's charging port or you park on the far side of a bay.
What cable does the Kia XCeed PHEV need?+−
A Type 2 to Type 2 cable. The XCeed PHEV has a Type 2 AC inlet and no DC rapid charging port. Its onboard charger is rated at 3.3kW, so a standard 16A cable is all that is required. A higher-rated cable will not increase charging speed on this car.
Can the Kia XCeed PHEV rapid charge?+−
No. There is no DC charging capability on the XCeed PHEV. All charging is AC only, limited to 3.3kW by the onboard charger. Even if you connect at a faster public AC point, the car will draw no more than 3.3kW.
How long does the Kia XCeed PHEV take to charge at home?+−
At 3.3kW, the 8.9kWh battery takes roughly three hours from empty to full. A standard 3-pin socket would take around four hours at 2.3kW. Either way, plugging in for an evening is all most owners need to keep the battery topped up.
What length cable do I need for the Kia XCeed PHEV?+−
A 5m cable suits most driveways and garages. If your wallbox is at an awkward distance from where you park, opt for 7m so the cable reaches with ease. There is no need to carry an especially long cable for this car given the short charge times involved.