Buying Guides
What EV Charging Cable Do You Need for a Rolec Home Charger?
On this page
Rolec is a UK manufacturer based in Lincolnshire, making EV chargers for homes, businesses, and public sites. Their residential range includes both tethered (cable built in) and untethered (socketed) models. If your Rolec charger has a Type 2 socket rather than a cable attached, you supply your own cable. Here is what to buy.
The short answer
If your Rolec home charger has a Type 2 socket, you need a Type 2 to Type 2 cable. The wallbox end is Type 2 to match the socket; the car end is Type 2 for most modern EVs, or Type 1 if your car has an older Japanese or American inlet. For most UK home installations, Rolec chargers are 7.4kW (32A single-phase), so a 7.4kW cable is the right choice.
Tethered vs untethered: which do you have?
Rolec chargers come in two configurations:
- Tethered: the cable is permanently fixed to the charger. You plug the car end into your car each time. No separate cable needed.
- Untethered (socketed): the charger has a Type 2 socket on the front. You bring your own cable and plug both ends in yourself - one into the charger, one into the car.
If you are not sure which you have, look at the front of the unit. A tethered charger has a cable coming out of it. An untethered charger has a socket recess.
Which power rating does your cable need?
Rolec residential chargers are most commonly installed at 7.4kW (32A single-phase). Some commercial and new-build installations use the three-phase 22kW version.
- For a 7.4kW (single-phase) Rolec charger, choose a 7.4kW cable rated at 32A.
- For a 22kW (three-phase) Rolec charger with a car that supports three-phase charging, choose a 22kW cable. If your car is single-phase only, a 7.4kW cable still works; the charger and car agree on the lower speed automatically.
The power rating is usually on a label on the charger. Your installation paperwork will also confirm it. If in doubt, 7.4kW is the safe assumption for a home installation.
What car connector do you need?
The Rolec socket is always Type 2. The connector at your car's end depends on your vehicle:
- Type 2: the standard for all modern EVs sold in the UK and Europe. Fits a seven-pin D-shaped socket on the car. This covers virtually all EVs registered from 2014 onward.
- Type 1: the older Japanese and North American standard. Fits older models such as the first-generation Nissan Leaf (up to 2017), early Mitsubishi Outlander PHEV, early Kia Soul EV, and some older Renault models. The socket is a round five-pin shape.
Use the vehicle finder on our site if you are unsure, or check the shape of the socket on your car.
What length cable do you need?
Measure from the charger to your car's charging port when parked in your usual position. Add a metre for slack. For most driveways with the charger near the parking spot, 5m is sufficient. If the charger is at some distance from where the car stops, measure first. Standard lengths are 5m, 7.5m, and 10m; longer lengths are available for unusual setups.
Coiled or straight cable?
Either works with a Rolec socketed charger. A coiled cable is neat: it hangs from a hook or bracket and springs back after use. A straight cable is lighter and lower cost. For a fixed home installation, coiled is a convenient choice if you value tidiness. For occasional use or if you use the same cable at other locations, straight is more practical.
Frequently asked questions
Does a Rolec charger come with a cable?
Tethered Rolec chargers have a cable built in. Untethered (socketed) Rolec chargers do not include a cable; you buy one separately. Check the product listing or your installation paperwork to confirm which type you have.
Can I use a cable from another brand with my Rolec charger?
Yes. The Type 2 connector and socket are standardised (IEC 62196-2). Any correctly rated Type 2 cable fits any Type 2 socket, regardless of charger brand. You are not locked into Rolec accessories.
My Rolec charger has a cable already - do I need a second one?
If your charger is tethered, the built-in cable handles home charging. A second cable is worth considering if you use an untethered charger at work, rent the car to others, or the built-in cable does not reach all your vehicles. Otherwise, the tethered cable is all you need at home.
What if I move house?
Rolec chargers are fixed to the wall and are not typically moved. If you install a new charger at your next property, the same cable works as long as the new charger has a Type 2 socket. The cable is not specific to a Rolec unit.

Written by
Gavin RogersCo-founder · drives a BMW iX2
Gavin runs a BMW iX2 and spends a lot of his time on the gap between a car's headline charging figure and what you actually get at home. A car quoting 11kW three-phase still charges at 7.4kW on a normal single-phase UK house, and that is exactly the kind of thing the site exists to make clear.
More from GavinKeep reading
More
charging guides.
Straight answers on connectors, charging speeds and what actually fits your car.
View all guides
Compatibility
How to Charge a Plug-in Hybrid (PHEV)
Charge a PHEV like any EV: use a Type 2 or Type 1 cable, and because the battery is small, a slow charger is often enough overnight. Most PHEVs use a Type 2 inlet; some older cars need Type 1 A 3-pin granny charger usually refills a small battery overnight Most PHEVs cannot rapid charge and rely on home AC charging

Compatibility
Can Two EVs Share One Charger?
Yes, two EVs can share one charger by charging in turn, splitting power, or using a dual-outlet unit. Sequential overnight charging suits most two-car homes Some smart chargers split power between two cars at once, more slowly A spare cable removes the hassle of swapping the lead between cars

How-to
How to Look After Your EV Battery
Keep the charge between 20 and 80% daily, moderate rapid charging, avoid temperature extremes and precondition in the cold. A middle charge band is gentlest for everyday driving Use rapid DC occasionally and home AC for regular top-ups Precondition the battery in winter and store at around 50 to 80%

How-to
Should You Charge Your EV to 100%?
For most EVs, cap daily charging around 80% and only fill to 100% before longer trips. Nickel based batteries prefer a daily limit near 80% to reduce wear Charge to 100% before long journeys when you need full range LFP batteries are usually fine charged to 100% regularly: check your handbook
