
Fiat 600e
Charging cable
Charges about 50% faster on 22 kW public posts than a 7.4 kW cable.
Why this fits your 600e+−
The Fiat 600e has a Type 2 inlet and a three-phase 11kW onboard charger. The 22kW cable carries its full 11kW on three-phase chargers. A 7.4kW cable would cap it. On a single-phase home wallbox both cables charge at the same 7.4kW.
Which Fiat 600e versions does it fit?+
This cable fits every Fiat 600e, because they all share the same Type 2 charging inlet. That includes:
- Fiat 600e Pop
- Fiat 600e Red
- Fiat 600e Icon
- Fiat 600e Sport
- Fiat 600e La Prima
Whichever 600e trim you drive, it is the same cable, so you can order with confidence.
Specifications+−
Delivery & returns+−
Free tracked UK delivery on every order. Built to order in the UK and dispatched fast. 30-day no-fuss returns.
Note: 11kW 3-phase (some markets 7.4kW std). CCS DC. 54kWh (51 usable).
How long does it take?
Charging
the Fiat 600e.
The Fiat 600e is a small electric SUV that arrived in UK showrooms in 2023, sitting above the smaller 500e and sharing its Stellantis platform with the Jeep Avenger and Alfa Romeo Junior Elettrica. The 54kWh battery (around 51kWh usable) gives it a claimed range of roughly 250 miles WLTP, making it practical for both urban use and day trips further afield. The inlet is Type 2 for AC charging, with a CCS port for rapid DC: the cable you bring connects via Type 2 to Type 2.
UK-spec 600e models come with an 11kW three-phase onboard AC charger as standard, a step up from the 7.4kW single-phase units found in some smaller Stellantis EVs on other markets. On the DC side it accepts up to 100kW, using the rapid charger's own tethered cable. For a car this size that DC figure comfortably covers a motorway stop without long waits.
The 54kWh battery is a practical size: it charges overnight on 7.4kW in around 7 hours and can rapid charge to 80% in around 30 minutes on a 100kW CCS charger. Rapid (DC) times are for a 10 to 80% charge, the way manufacturers quote them. Real-world charging varies with temperature, battery state and the charger itself.
7.4 kW or 22 kW?
Which cable does
the 600e need?
Although the 600e has an 11kW three-phase charger, the speed you actually get depends on your power supply, not the cable. UK home wallboxes are almost universally single-phase, which caps charging at 7.4kW. A 7.4kW Type 2 cable matches what your wallbox can deliver and is the straightforward choice for most 600e owners. The car will charge at 7.4kW whether you use a 7.4kW or a 22kW rated cable on that installation.
There are two scenarios where choosing a 22kW cable makes sense: if you have a three-phase supply at home (unusual in UK residential properties, but not unknown), or if you park regularly at 22kW public AC charge points. At those locations the 600e's 11kW charger runs at its rated speed. On any standard single-phase connection, the cable rating is academic and the less expensive 7.4kW cable is the practical buy.
What does it cost to charge?
Filling the 54kWh battery from empty costs around £4 on an off-peak EV tariff at approximately 7.5p per kWh, and around £15 at a standard domestic rate of around 27p. At that battery size the cost difference between tariffs is modest day to day, but it compounds over a year of daily charging. Public rapid chargers typically charge 45p to 80p per kWh and are best used on longer journeys. Always check current rates, as tariffs change.
Also for your 600e
Goes well with.
Fiat 600e FAQs
Good
questions.
Still not sure? Our team will confirm the right cable for your vehicle.
Contact usCan the Fiat 600e charge at 22kW?+−
Yes, the Fiat 600e has a three-phase onboard charger, so with a 22kW cable and a three-phase supply it can charge at up to 11kW.
What length charging cable should I get?+−
5m suits most home and public charge points. Choose 7.5m or 10m if the charge point is far from your car's charging port or you park on the far side of a bay.
What charging cable does the Fiat 600e need?+−
A Type 2 to Type 2 cable, used at home wallboxes and public AC charge points. A 5m lead fits most driveways without difficulty. For home charging on a single-phase supply, 7.4kW is all the connection can provide: a 22kW cable will not improve on that unless you have three-phase power or use 22kW public AC points.
Can the Fiat 600e charge at 11kW?+−
Yes, the UK-spec 600e has an 11kW three-phase onboard charger. To reach that speed you need a three-phase supply, either at home or at a public AC point rated at 11kW or higher. On a standard single-phase home wallbox the maximum is 7.4kW, regardless of cable rating.
How long does the Fiat 600e take to charge from empty?+−
On a 7.4kW single-phase wallbox, the 54kWh battery takes around 7 to 7.5 hours from empty to full. On a three-phase 11kW wallbox or public AC point, that drops to roughly 5 hours. For top-up charging rather than a full cycle, either method covers typical daily mileage well within a night.
Does the Fiat 600e have CCS rapid charging?+−
Yes. The 600e accepts up to 100kW on CCS DC, using the rapid charger's own tethered cable. That is quick enough to add around 50 miles in roughly 10 minutes under good conditions. The Type 2 cable you carry is only for AC charging and plays no part in rapid DC sessions.



