Land Rover Range Rover Velar P400e
Charging cable
Full AC charging speed for your car.
Why this fits your Range Rover Velar P400e+−
The Land Rover Range Rover Velar P400e has a Type 2 inlet and a single-phase 7kW onboard charger. A 7.4kW cable already delivers its full AC speed. The 22kW option only helps if your next car charges faster.
Specifications+−
Delivery & returns+−
Free tracked UK delivery on every order. Built to order in the UK and dispatched fast. 30-day no-fuss returns.
Note: MY24 facelift PHEV. 19.2kWh (up from 13.6); AC 7kW (~2.5h); DC 50kW (0-80% ~30min); ~40mi WLTP EV range.
How long does it take?
Charging
the Land Rover Range Rover Velar P400e.
The Range Rover Velar P400e is a plug-in hybrid mid-size SUV, with the current facelift model (MY24 onwards, from 2023) featuring a substantially upgraded 19.2kWh battery compared to the 13.6kWh in earlier Velars. That improvement translates to a longer electric range, quoted at around 40 miles WLTP. AC charging uses a Type 2 inlet, and DC rapid charging via CCS is supported at up to 50kW. The cable you bring yourself is a Type 2 to Type 2 lead for wallbox and public AC charging.
The onboard AC charger is single-phase and rated at up to 7kW. On a 7kW wallbox, Land Rover quote around 2.5 hours for a full AC charge, which is notably quicker than older PHEV models thanks to the charger's efficiency rather than a higher kW rating. DC rapid charging is significantly faster but uses the charger's own tethered cable at the rapid charge point.
Estimates based on battery size and charge power. Rapid (DC) times are for a 10 to 80% charge, the way manufacturers quote them. Real-world charging varies with temperature, battery state and the charger itself.
7.4 kW or 22 kW?
Which cable does
the Range Rover Velar P400e need?
The Velar P400e's onboard AC charger is rated at 7kW on a single-phase supply, which is the maximum it will draw from any AC source. A 7.4kW Type 2 cable is the right match, delivering the car's full AC rate. There is no benefit in buying a 22kW or 11kW three-phase cable: the Velar P400e is a single-phase charger and cannot use a higher AC rate regardless of what the cable or charge point is rated at.
A 5m cable works well for most home driveways. For public AC charge points or workplace charging where the cable routing is less certain, a 7m cable is a practical upgrade. DC rapid charging at up to 50kW is available on the facelift Velar, which can take the battery from close to empty to around 80% in approximately 30 minutes, using the tethered cable at a CCS rapid charger.
What does it cost to charge?
Charging the 19.2kWh battery from empty costs roughly £1.45 on an off-peak tariff of around 7.5p per kWh, or around £5 at a standard rate of 27p per kWh. The battery is small enough that even a 3-pin socket can top it up overnight from a partial charge, though a dedicated 7kW wallbox at around 2.5 hours is far more convenient for daily use. Check current energy tariffs, as rates change.
Also for your Range Rover Velar P400e
Goes well with.
Plug & Cable Holder · Type 2
Wottz Plug and Cable Holder
Carry Bag
Wottz Carry Bag
Dust Cap · Type 2
Wottz Dust Cap
Land Rover Range Rover Velar P400e FAQs
Good
questions.
Still not sure? Our team will confirm the right cable for your vehicle.
Contact usWhat charging cable does the Land Rover Range Rover Velar P400e need?+−
The Land Rover Range Rover Velar P400e has a Type 2 inlet, so it needs a Type 2 to Type 2 cable for UK home and public charging. It charges on single-phase AC at up to 7kW.
Can the Land Rover Range Rover Velar P400e charge at 22kW?+−
No, the Land Rover Range Rover Velar P400e has a single-phase onboard charger limited to 7kW, so a 7.4kW cable already delivers its full AC speed. A 22kW cable would only benefit a future car.
What length charging cable should I get?+−
5m suits most home and public charge points. Choose 7.5m or 10m if the charge point is far from your car's charging port or you park on the far side of a bay.
What cable does the Range Rover Velar P400e need?+−
A Type 2 to Type 2 cable for home wallboxes and public AC points. The Velar P400e charges at up to 7kW on a single-phase supply. A 7.4kW cable is the correct choice. A 22kW three-phase cable is unnecessary and will not increase the charging speed on this car.
How long does the Range Rover Velar P400e take to charge?+−
On a 7kW home wallbox, the 19.2kWh battery takes around 2.5 hours from empty. On a standard 3-pin socket, allow around eight hours. The facelift Velar also supports DC rapid charging at up to 50kW, which can charge to 80% in roughly 30 minutes using the rapid charger's own tethered cable.
Does the MY24 Velar P400e charge faster than the older model?+−
The MY24 facelift increased the battery from 13.6kWh to 19.2kWh and added DC rapid charging at up to 50kW via CCS. The AC charge rate remains at 7kW, so AC charge times are broadly similar in rate, though the larger battery takes a little more total time to fill from empty.
What length cable do I need for the Range Rover Velar P400e?+−
A 5m cable suits most home driveways. If your wallbox is positioned some distance from where you park, or you frequently use public AC charge points where cable reach is less predictable, a 7m cable is the safer choice and avoids any awkward stretching.