Mazda CX-80
Charging cable
Full AC charging speed for your car.
Why this fits your CX-80+−
The Mazda CX-80 has a Type 2 inlet and a single-phase 7.2kW onboard charger. A 7.4kW cable already delivers its full AC speed. The 22kW option only helps if your next car charges faster.
Which Mazda CX-80 versions does it fit?+
This cable fits every Mazda CX-80, because they all share the same Type 2 charging inlet. That includes:
- Mazda CX-80 Homura
- Mazda CX-80 Takumi
- Mazda CX-80 Homura Plus
- Mazda CX-80 Takumi Plus
- Mazda CX-80 Exclusive Line
Whichever CX-80 trim you drive, it is the same cable, so you can order with confidence.
Specifications+−
Delivery & returns+−
Free tracked UK delivery on every order. Built to order in the UK and dispatched fast. 30-day no-fuss returns.
Note: Same PHEV system as CX-60; 7.2kW single-phase AC; no DC
How long does it take?
Charging
the Mazda CX-80.
The Mazda CX-80 is a three-row plug-in hybrid SUV that arrived in the UK in 2024, sharing its PHEV powertrain with the CX-60 but extended to seat up to seven occupants. The 17.8kWh battery provides a usable electric-only range for school runs and daily errands, while the petrol engine covers longer motorway journeys without any range anxiety. Charging uses a Type 2 inlet, and there is no rapid DC charging on this vehicle.
All top-ups go through the Type 2 socket using a cable you provide, connected to a home wallbox or a public AC charge post. The onboard AC charger accepts up to 7.2kW on a single phase, matching the rate of a standard home 7.4kW wallbox closely. Because the CX-80 PHEV shares its charging architecture with the CX-60, the same cable works for both if you run two cars.
Estimates based on battery size and charge power. Rapid (DC) times are for a 10 to 80% charge, the way manufacturers quote them. Real-world charging varies with temperature, battery state and the charger itself.
7.4 kW or 22 kW?
Which cable does
the CX-80 need?
A 7.4kW single-phase Type 2 to Type 2 cable is the right match for the CX-80 PHEV. The car's onboard charger tops out at 7.2kW on a single phase, and a 7.4kW cable delivers that rate without restriction from any compatible home wallbox or public AC post. Three-phase 22kW cables are unnecessary here because the car does not support three-phase charging.
Cable length is the main practical decision for CX-80 owners. A 5m lead covers most driveways and is manageable day to day. Families with a busy driveway or a wallbox positioned away from the usual parking spot may find a 7m cable worthwhile, providing enough reach without having to shuffle vehicles around.
What does it cost to charge?
Topping up the 17.8kWh battery from empty costs around £1.30 at an off-peak tariff of roughly 7.5p per kWh, or roughly £5 at a standard rate of around 27p. Given the modest battery size, even a partial charge at any tariff is inexpensive. Plugging in daily means the electric range is available for the journeys where it matters most. Check current tariffs, as rates vary by supplier.
Also for your CX-80
Goes well with.
Plug & Cable Holder · Type 2
Wottz Plug and Cable Holder
Carry Bag
Wottz Carry Bag
Dust Cap · Type 2
Wottz Dust Cap
Mazda CX-80 FAQs
Good
questions.
Still not sure? Our team will confirm the right cable for your vehicle.
Contact usWhat charging cable does the Mazda CX-80 need?+−
The Mazda CX-80 has a Type 2 inlet, so it needs a Type 2 to Type 2 cable for UK home and public charging. It charges on single-phase AC at up to 7.2kW.
Can the Mazda CX-80 charge at 22kW?+−
No, the Mazda CX-80 has a single-phase onboard charger limited to 7.2kW, so a 7.4kW cable already delivers its full AC speed. A 22kW cable would only benefit a future car.
What length charging cable should I get?+−
5m suits most home and public charge points. Choose 7.5m or 10m if the charge point is far from your car's charging port or you park on the far side of a bay.
What charging cable does the Mazda CX-80 PHEV need?+−
A Type 2 to Type 2 cable rated to 7.4kW for home and public AC charging. The CX-80 PHEV has a Type 2 inlet and charges at up to 7.2kW on a single phase. No rapid DC charging is possible, so the Type 2 cable handles all plug-in sessions. A 22kW three-phase cable is not needed for this car.
Can the Mazda CX-80 PHEV charge faster than 7.2kW?+−
No. The onboard AC charger is limited to 7.2kW on a single phase. Even on a 22kW public AC post, the car will only draw up to 7.2kW. There is no three-phase or DC rapid charging capability on the CX-80 PHEV.
How long does the Mazda CX-80 PHEV take to charge from empty?+−
On a 7.4kW home wallbox, the 17.8kWh battery takes just under 2.5 hours from fully empty. A 3-pin granny charger takes around 6 to 7 hours for the same. For most owners, plugging in overnight or during a working day provides a full charge with ease.
Is a Type 2 cable compatible with both the CX-60 and CX-80 PHEVs?+−
Yes. Both the Mazda CX-60 and CX-80 PHEVs share the same Type 2 inlet and 7.2kW single-phase AC charging system. A single 7.4kW Type 2 to Type 2 cable works for both, which is convenient for households or fleets running more than one of these models.